Food Check 2 & 5 Thermometers

• two models available 0.1^oC or 1^oC resolution
  
• durable, robust construction
  
• designed for the professional caterer
  
• supplied complete with penetration probe
  

The Food Check digital thermometers are general purpose instruments designed specifically for use in the food and catering industry.  The Food Check thermometers are ideal for measuring the temperature quickly and accurately, when monitoring cooked and chilled foods as part of HACCP and health and safety procedures.

The instrument features a large, easy to read, LCD display with open circuit and low battery indication.  The Food Check thermometer incorporates a simple to us on/off switch and is powered by a 9 volt battery that gives 200 hours continuous use.

The Food Check 2 measures temperature of the range of -49.9 to +149.9^oCwith a resolution of 0.1^oC and the Food Check 5 measures temperature over the range of -30 to +300^oC with a resolution of 1^oC

Each Food Check thermometer is supplied with a permanently attached food penetration probe with 130mm pointed stainless steel stem and 500mm PVC connecting lead.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Food Check
Order Code	Description
4098826	Food Check 2 Thermometer (221-009)
4098822	Food Check 5 Thermometer (221-008)
4098893	Protective PVC Boot (830-200)
4098906	Wall Bracket (832-110)

• rapid temperature measurement in under four seconds
  
• colour coded to help eliminate cross contamination
  
• can be part of HACCP & due diligence procedures
  
• two point traceable calibration certificae
• foldaway probe for safe storage
  
  

The Thermapen thermometers are designed for reliability and ease of use in industry today.  The thermometers incorporate a clear digital display with a precise read out of temperature over the range of -49.9 to +199.9^oC or -50 to +300^oC and a 0.1^oC or 1^oC resolution.  Both low battery and open circuit indication are also displayed, when applicable.

The Thermapen is lightweight, at less than 100 grams including battery and probe.  The casing is manufactured from high impact ABS plastic designed to cope with routine day-to-day applications.  The Thermapen 1 and 5 thermometers incorporate a choice of one of three different styles of probe, a penetration, surface or air probe.  An auto power on/off facility turns the instrument on when the probe is in use and automatically off after five minutes, maximising battery life.  The probe conveniently folds back through 180 degrees into the side of the instrument when not in use, turning the instrument off.

Each Thermapen is supplied with a detachable wrist strap, battery and instruction card.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Thermapen^TM 1 & 5 - Fast response thermometers 

• guaranteed to reach the temperature in just 4 seconds
  
• over 50% faster response than traditional probes
  
• two models 0.1^oC or 1^oC resolution
  
• one handed operation

The Thermapen pocket thermometers are designed for reliability and ease of use in the food and catering industries.

The thermometers give a clear digital display with good accuracy over the range -49.9°C to +199.9°C or -50°C to + 300°C and a resolution of 0.1°C or 1°C.

Thermapen 5 Fast Response model can indicate 100% of test temperature in less than 5 seconds.  Powered by standard 12 volt alkaline battery each thermometer is supplied with a detachable wrist strap and operating instructions.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Thermapen Fast Response
Order Code	Description
4098791	Fast Response Thermapen 1 (211-571)
4098786	Fast Response Thermapen 5 (211-575)
4098795	Protective PVC Wallet, (830-110)

CaterTemp^TM 2 & 5 Thermometers 

• two models available 0.1^oC or 1^oC resolution
  
• proven electronic circuitry & durability
  
• designed for the professional caterer
  
• supplied complete with penetration probe
  

The CaterTemp 2 measures temperature over the range of -49.9 to +199.9^oC with a resolution of 0.1^oC and the CaterTemp 5 over the range of -50 to +300^oC with a resolution of 1^oC.

Both instruments feature a bright, easy to read LCD, displaying open circuit and low battery indication, when applicable.  The CaterTemp thermometers are powered by a 9 volt battery which gives the thermometers approximately 200 hours continuous use.

Each CaterTemp thermometer is supplied with a permanently attached food penetration probe with 130mm pointed stainless steel stem and one metre coiled PU lead.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

CaterTemp Thermometers
Order Code	Description
4098818	CaterTemp 2 thermometer (221-006)
4098820	CaterTemp 5 Thermometer (221-007)
4098893	Protective PVC Boot (830-200)
4098906	Wall Bracket (832-110)

ThermaCheck Thermistor Thermometer 

• high system accuracy +0.4^oC
  
• ideal for routine day to day usage
  
• temperature range -39.9 to 109.9^oC
  
• supplied complete with a penetration probe
  

The ThermaCheck hand held thermistor thermometer has been specifically designed for use in the food processing and catering industries to cope with routine day to day usage.

The ThermaCheck measures temperatures over the range -39.9 to 109.9^oC with a resolution of 0.1^oC and a high system accuracy of +0.4^oC (-10 to +70^oC).

The instrument features a large, easy to read, LCD display with open circuit and low battery indication.  The ThermaCheck is powered by a 9 volt battery which gives the thermometer approximately 100 hours continuous use.  The unit also incorporates an auto power off facility which maximises battery life, turning the instrument off automatically after 5 minutes.

The ThermaCheck thermometer is supplied complete with a permanently attached, general purpose, food penetration probe with a 130mm stainless steel stem and a one metre coiled PU lead.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

ThermaCheck Thermometer
Order Code	Description
4098825	ThermaCheck Thermometer (226-022)
4098893	Protective PVC Boot (830-200)
4098906	Wall Bracket (832-110)

Thermamite^TM 1 & 5 Thermometers

• compact & robust design
  
• two models 0.1^oC or 1^oC resolution
  
• accuracy, flexibility & ease of use
  
• range -49.9 to +199.9^oC or -30 to +300^oC
  

The Thermamite thermometers offer the accuracy, flexibility and ease of use, coupled with durability and reliability that is required by the food and catering industry in helping to meet today's food hygiene legislation.

Both the Thermamite 1 and 5 incorporates a clear LCD display with a precise read out of temperature over the range of -49.9 to +199.9^oC or -30 to +300^oC and a 0.1^oC  or 1^oC resolution.  Low battery and open circuit indication are also displayed, when applicable.

Both instruments are powered by a 9 volt PP3 battery with a minimum life expectancy of up to 500 hours.  Each thermometer is supplied with a permanently attached rigid pointed, stainless steel food penetration probe (Æ3.3 x 108mm) and  500mm connecting lead, battery and instruction card.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Thermamite Thermometers
Order Code	Description
4099794	Thermamite 1 Thermometer - Blue (262-051)
4099795	Thermamite 5 Thermometer - Blue (261-055)
4098896	Protective PVC Boot (830-230)
4099797	Wall Bracket (832-120)

Catering Thermometer Kits

• choice of 0.1^oC or 1^oC resolution
  
• value for money

These thermometer and probe kits are designed for the food and catering industry.  Each kit is supplied in a ABS carrying case with a temperature log book, a tube of 70 probe wipes and a traceable certificate of calibration.

ETI 2001 Catering Kit 1^oC or 1^oC

Each kit contains:

1 x 221-201    ETI 2001 thermometer

1 x 123-160    penetration probe

1 x 133-362    PTFE wire probe

1 x 831-100    temperature log book

1 x 836-022    mini tube of 70 Probe Wipes

1 x 834-100    ABS carrying case

Catering Thermometer Kits
Order Code	Description
4098850	2001 thermometer kit (860-015)

EcoTemp Max/Min Thermometer^TM

• detachable penetration probe
• max/min, hold & ^oC/^oF functions

The EcoTemp digital thermometer features a large, easy to read, LCD display with display hold and max/min memory functions.  The unit measures temperature over the range of -49.9 to +199.9^oC with a 0.1^oC/^oF resolution.  Both open circuit and low battery indication are displayed, when applicable.

The thermometer is ideal for monitoring cooking, cooling and food holding temperatures as part of HACCP, due diligence and health and safety procedures.

Each thermometer is supplied with a detachable, rigid, pointed, stainless steel penetration probe (Æ3.5 x 125mm) with a Æ3.2 x 750mm silicone connecting lead.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Ecotemp
Order Code	Description
4099677	EcoTemp thermometer & probe (810-950)

Gourmet - Folding Probe Thermometer

• water resistant pocked sized instrument
  
• 8,000 hours continuous battery use
  

The water resistant folding probe thermometer (FPT) is an easy to use instrument that is ideal for monitoring cooking, cooling and food holding temperatures as part of HACCP and health and safety procedures.  The FPT measures temperature over the range of -49.9 to +149.9^oC with a 0.1^oC/^oF resolution and incorporates two push button switches, max/min and on/off.

The FPT's battery will last up to 8,000 hours continuous use or, if used two hours a day, seven days a week, for a minimum of 10 years.  Each unit incorporates a stainless steel, food penetration probe (Æ3.5 x 110mm) that conveniently folds back into the side of the instrument when not in use, rotating through 180 degrees, allowing the user to transport the instrument safely.

A protective PVC wallet and a zip pouch, both with a belt loop are available.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Gourmet Folding Probe Thermometer
Order Code	Description
4098792	FPT Thermometer (810-730)
4098795	Protective PVC Wallet (830-110)

T Shaped Thermometer

This compact thermometer measures temperature over the range of -49.9 to +149.9^oC.  The thermometer features a Ø3.5 x 120mm pointed stainless steel probe.  The instrument incorporates a ^oC/^oF switch and a display hold feature.  Each unit is supplied with a probe cover with a pocket clip.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

T Shaped Thermometer
Order Code	Description
4099670	T Shaped Thermometer (810-265)

Water Resistant Thermometer 

This water resistant max/min thermometer features a Ø3.5 x 120mm pointed stainless steel food penetration probe.

The unit measures temperature over the range of -49.9 to +199.9^oC with a resolution of 0.1^oC/^oF.

The thermometer features three, easy to use buttons, max/min, ^oC/^oF and on/off.  The thermometer is supplied with a probe cover with a pocket clip.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Water Resistant Thermometer
Order Code	Description
4099673	Water Resistant Thermometer (810-270)

Max/Min Probe Thermometer

• detachable penetration probe
  
• max/min, hold & ^oC/^oF functions
  

This digital max/min thermometer features an easy to read display with display hold and max/min memory functions.  The unit measures temperature over the range of -50 to +150^oC with a 0.1^oC/^oF resolution.

The thermometer features a useful fold away worktop stand.  Additionally, the thermometer incorporates a magnetic pad and a keyhole slot for attaching the unit to an appliance or for wall mounting.  The max/min thermometer is powered by a single MN2400 (AAA) battery with a life expectancy of approximately 5,000 hours.

Each instrument is supplied with a detachable, stainless steel, penetration probe (Ø3.5 x 120mm) with a one metre PVC connecting lead and probe cover.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Max/Min probe Thermometer
Order Code	Description
4099674	Max/Min thermometer (810-930)
4099675	Replacement Probe (810-935)

Fridge or Freezer Alarm Thermometers - Max/min Thermometer

This max/min and alarm fridge or freezer thermometer features a clear LCD display, indicating temperature over the range of -49.9 to +69.9^oC.

The thermometer is housed in an ABS case and incorporates a backlight, two temperature sensors, a remote probe with a one metre PVC lead for the appliance temperature, and an internal sensor for the air room temperature.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Max/Min Alarm Thermometer
Order Code	Description
4099788	Max/Min Alarm Thermometer (810-210)

Fridge or Freezer Alarm Thermometers - Dual Probe Alarm Thermometer

This fridge and freezer alarm thermometer displays simultaneously the temperature of two appliances, over the range of -39.9 to +69.9^oC with a 0.1^oC resolution.  The unit features an audible, programmable alarm indicating when the temperature is outside set limits.  Supplied with two remote probes, both with a one metre PVC lead.

Dual Sensor Alarm Thermometer
Order Code	Description
4099786	Alarm Thermometer (810-200)

Fridge or Freezer Alarm Thermometers - FoodSafe Fridge Thermometer

Most traditional temperature measuring devices in fridges only measure the air temperature.  This is a major problem because cold air is heavier than warm air and therefore "drops out of the fridge" the moment the door is opened.

Why a FoodSafe Thermometer?

The FoodSafe food simulant thermometer, on the other hand, is an encased thermometer that ensures that it indicates temperature similar to that of the food stored in the fridge or chill cabinet.  Therefore it is not subject to the changes in air temperature that normally occur when the door is opened.  It is the temperature of the food that is important in preventing the growth of food poisoning bacteria.

The easy to read FoodSafe is ideal for domestic or commercial use, as it is reliable, robust and hygienic.  The thermometer indicates temperature of the range of -20 to +40^oC with an accuracy of +0.5^oC over the range of -5 to +20^oC, 1^oC thereafter.  The unit is housed in a clear plastic case measuring Ø25mm x 130mm high.

Foodsafe Fridge Food Simulant Thermometer
Order Code	Description
4099781	FoodSafe Food Simulant Thermometer (803-900)

Fridge or Freezer Thermometers - Ø52mm Dial Thermometer

This easy to read fridge or freezer thermometer has a Ø52mm dial, indicating temperature over a range of -30 to +30^oC in 1^oC divisions and incorporates colour coded zones.  The ABS case incorporates a plastic hook to hang from a shelf.

Dial Thermometer
Order Code	Description
4099747	Ø52mm Dial Thermometer (800-100)

Fridge or Freezer Thermometers - Ø70mm Dial Thermometer

This fridge or freezer thermometer has a Ø70mm dial, indicating temperature over a range of -30 to +30^oC in 1^oC divisions and incorporates colour-coded zones.  THE ABS case measures 70 x 60mm.  Can be free standing or hung from a shelf.

Dial Thermometer
Order Code	Description
4099745	Ø70mm Dial Thermometer (800-000)

Fridge or Freezer Thermometers - Clear Spirit Filled Thermometer

This spirit filled fridge/freezer thermometer is encased in a clear ABS housing (10 x 32 x 124mm).  The thermometer indicates temperature over a range of -40 to +20^oC/^oF.  The unit is designed to be hung from a shelf or wall mounted (brackets supplied).

Clear Spirit Filled Thermometer
Order Code	Description
4099780	Clear Spirit Filled Thermometer (803-925)

Oven Thermometer & timer

• dual display - temperature & countdown time
  
• high temperature detachable probe
  

This combined clock, countdown timer and thermometer displays both the actual and the alarm temperature over the range of 0 to +300^oC and simultaneously the countdown or the actual timewith a resolution of 0.1^oC or ^oF.

The timer will count down or up from/to 23 hours, 59 minutes and 59 seconds, the real time clock will display the time in either 12 or 24 hour format.

The oven thermometer features an audible high alarm that can be set from the simple to use seven button keypad.  The alarm temperature is continuously displayed.  The unit is designed to sit on a worktop or can be attached to an appliance via the magnetic pads at the rear of the instrument.

The thermometer is supplied with a high temperature probe and a two metre stainless steel braided lead.  The insertion length of the probe is 150mm (Ø4mm) and incorporates a reduced diameter tip to aid response time.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Oven Thermometr & Timer
Order Code	Description
4099791	Oven Thermometer & Timer (810-060)

Dial Oven Thermometer - Ø45mm

Count Up/Down Timers

Cooking Thermometers

Meat Roasting Thermometers

The meat roasting thermometer incorporates a Ø50mm dial with a pointed Ø4 x 105mm, stainless steel stem. 

The thermometer indicates temperature over the range of 0 to 120^oC in 1^oC divisions.  For the most accurate temperature recording, insert the thermometer in the thickest part of the meat or poultry.  The dial is clearly marked for beef, lamb, pork and poultry.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Meat Roasting Thermometer
Order Code	Description
4099771	Meat Roasting Thermometer (800-804)

Frying Thermometer

The frying thermometer incorporates a Ø50mm dial and a pointed, stainless steel, Ø4 x 150mm stem. 

The frying thermometer indicates temperature over the range of 0 to +300^oC in 10^oC divisions.  For the most accurate temperature recording, insert the thermometer in the thickest part of the product.  The dial is clearly marked for meat, poultry, fish and chips.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Frying Thermometer
Order Code	Description
4099772	Frying Thermometer (800-805)

Cook's Thermometer

The cook's thermometer indicates temperature over the range of +40 to +200^oC in 2^oC divisions.  The thermometer's scale is clearly marked for caramel, hard crack, crack, soft crack, hard ball, soft ball and thread.

The thermometer's stainless steel casing measures 50 x 240mm plus 90mm plastic handle.

Simply insert the thermometer into the liquid being measured to the level indicated and read the temperature.

Cooks Thermometer
Order Code	Description
4099773	Cook's thermometer (800-806)

Brass Sugar & Jam Thermometer

The traditional brass sugar and jam thermometer indicates temperature over the range of +40 to +200^oC in 2^oC divisions.  The thermometer's brass casing measures 47 x 200mm plus a 40mm copper handle.

The thermometer's scale is clearly marked for caramel, crack, hard ball, soft ball, jam and sterilise.

Simply insert the thermometer into the liquid being measured to the level indicated and read the temperature.

Brass Sugar & Jam Thermometer
Order Code	Description
4099774	Brass sugar & jam thermometer (800-808)

Coffee/Milk Thermometers

The coffee/milk dial thermometers incorporate colour coded zones that make it fast and simple to use.  Available with Ø25mm dial x 125mm stem or Ø45mm dial x 175mm stem, both are supplied with a stainless steel jug mounting probe clip.

 

Coffee/Milk Thermometer
Order Code	Description
4099775	25mm dial coffee/milk thermometer (800-810)
4099752	Mounting clip (830-220)

Dial Thermometer

These  Ø25mm or Ø45mm dial thermometers feature a pointed Ø4mm  130mm  stainless steel stem and are supplied with a probe cover.  Each dial thermometer is available in three scales.  An optional stainless steel mounting clip is also available.

As per HACCP requirements, all probes should be cleaned with Anti-Bacterial Probe Wipes

Dial Thermometer 25 - 45mm
Order Code	Description
4099743	Ø25mm dial, -40 to +70oC (800-811)
4099696	Ø25mm dial, -10 to +110oC (800-812)
4099749	Ø25mm dial, 0 to +250oC (800-813)
4099902	Ø45mm dial, -40 to +70oC (800-801)
4099693	Ø45mm dial, -10 to +110oC (800-802)
4099694	Ø45mm dial, 0 to +250oC (800-803)
4099752	Ø4mm probe holder clip (830-220)

Catering Accessories

Temperature Log Books & Folders

In commercial kitchens each fridge, freezer or cold cabinet should have its own temperature log/record book or folder.  These log books contain six months' supply of easy to use record sheets with a wipe clean cover.

Alternatively, temperature log/record folders are available that allow users to store records for multiple appliances.  Each log book or folder allows the user to enter three readings per day consisting of the temperature, the time and the initials of the person responsible for recording the data.

Temperature Log Books
Order Code	Description
4099822	A5 Temperature Log Book (831-100)
	A4 Temperature Log Folder (831-101)

Probe Holder Clips

These stainless steel probe holders clip on the top of a jug or similar to hold in place a temperature probe.  Two models are available, one that will accept either a Ø3mm or Ø3.3mm probe stem and the other is designed to work in conjunction with a bi-metal thermometer and will accept a Ø4mm probe stem.  The probe should not touch the bottom or the sides of the container.

Probe Holder Clips
Order Code	Description
4099752	Ø4mm probe holder clip (not illustrated) (830-220)
	Ø3mm & 3.3mm probe holder clip (830-500)

Protective Boots

Protective boots help to protect instruments against accidental damage.  Different shaped protective PVC boots are available for the following thermometers:  2000 series, EcoTemp, Thermamite, CaterTemp Plus and Therma Plus.

A protective silicone boot is also available for the ThermaData loggers.

 

Protective Boots
Order Code	Description
4098894	PVC Boot - 2000 Series (830-205)
4098896	PVC Boot - Thermamite (830-230)

Colour Coded Protective PVC  Boots

These colour coded PVC boots help to protect instruments against accidental damage.  The colour coded boots can be used for the Therma 1, 2, 3, 5 & 12, the ThermaCheck and the Therma 20 thermometers.

 

Colour Coded Protective Boots
Order Code	Description
4098893	Protective PVC Boot - Yellow (830-200)
Other colours are available on request

Probe Wipes

Anti-bacterial

Ross Brown Sales offers a selection of anti-bacterial wipes for use in busy kitchens, restaurants and cafes, from a small pocket sized tub to a large bucket.  These wipes can be used as part of HACCP and food safety procedures.

Probe Wipes are ideal for reducing harmful bacteria in the food and catering industries.  Each wipe is pre-saturated with a broad spectrum anti-bacterial solution that is odourless and does not taint food.

The Probe Wipes are effective against a wide range of bacteria including listeria and salmonella.  Each wipe contains an effective cleansing solution that helps reduce the risk of cross contamination.

The bucket of 1,000 anti-bacterial Cater Wipes is ideal for cleaning larger areas in kitchens, serving counters or anywhere where bacteria could grow.

Single Sachets of Probe Wipes

These convenient, single sachet, white anti-bacterial Probe Wipes are safe and easy to use.  Each wipe measures 150 x 195mm.  The single sachet wipes are sold in cartons of 100 single sachets.

The mini tub is designed to fit into the user's pocket and incorporates an easy to dispense flip top lid.  Each tub contains 70 blue anti-bacterial Probe Wipes.  Each Probe Wipe measures 70 x 130mm.   

Anti-Bacterial Probe Wipes
Order Code	Description
4099826	10 Tubs of Mini Probe Wipes (836-020)

Each tub contains 200 blue anti-bacterial probe Wipes measuring 130 x 130mm.  The tubs are supplied individually or in a carton of six tubs of 200 wipes.  An optional wall bracket is also available enabling a single tub of wipes to be conveniently positioned.

Anti-Bacterial Probe Wipes
Order Code	Description
4099831	Single Tub of 200 Probe Wipes (836-052)
4099830	Carton of 6 Tubs of Probe Wipes (836-050)
4099824	Wall Bracket for Single Tub (832-300)

Cater Wipes are ideal for cleaning serving counters, machinery and other hygiene sensitive areas.  Each wipe measures 200 x 200mm.  The wipes are supplied in airtight, easy to dispense, buckets of 1,000 blue anti-bacterial wipes. 

Anti-Bacterial Probe Wipes
Order Code	Description
4099833	Bucket of 1,000 Cater Wipes (836-100)

CarterTemp^TM Plus - waterproof thermometers

• waterproof case offering IP66/67 protection
  
• extruded aluminium case for superior durability
  
• rubber bumper seal for impact resistance
  
• supplied complete with food penetration probe
  

Therma Plus - waterproof thermometers

• waterproof case offering IP66/67 protection
  
• extruded aluminium case for superior durability
  
• rubber bumper seals for impact resistance
  
• interchangeable thermocouple probes
  

Therma 25T Thermometers

• robust water resistant case
  
• large clear digital display with a 0.1^oC resolution
  
• convenient one handed operation
  
• max/min memory function
  

Therma 20 - Thermistor Thermometers

• temperature range -39.9 to +109.9^oC
  
• wide range of interchangeable probes
  
• high system accuracy +0.4^oC
  
• water resistant case offering IP65 protection
  

The Therma 20 hand held thermistor thermometer has been specifically designed for use in the food processing and catering industries with HACCP, due diligence and health and safety procedures in mind.

What are data loggers?

Data loggers are electronic devices that record temperature over a period of time for analysis at a later date.  The user chooses what information is required and the data logger records it.  The data loggers incorporate a thermistor sensor that measures the temperature, and the data loggers internal microprocessor chip then stores the data. 
The stored data can then be transferred to a computer, via a USB cradle, for further analysis at a time convenient to the user.

ThermaData Loggers - recording thermometers

• waterproof housing offering IP66/67 protection
  
• meets EN 12830, S & T, C & D, 1
  
• range -40 to +85^oC or +125^oC
  
• resolution 0.1^oC, high accuracy +0.5^oC

The ThermaData logger mk II series consists of a comprehensive range of portable data loggers utilising the latest in electronic technology.  The ThermaData loggers are housed in a waterproof, ergonomic case that is designed to meet IP66/67 protection.

The ThermaData logger mk II range offers the choice of either blind data loggers or data loggers with a LCD display.  Other options include internal and external temperature sensor/probe.  The external probes can be either fixed or detachable via a waterproof three pin connector.  The remote temperature probes are supplied with a one metre PVC/PFA lead.